What types of averages are available?

There are three types of averages: general, pre-meal and post-meal. To view results and averages, press and release left and right arrows to view stored results. The most recent test result appears on the display. ...

What parts of the meter should be cleaned and disinfected?

Be sure to clean the areas around slots and openings, while being careful not to get any moisture in them. You should also wipe down the entire meter surface, including the meter display.

What can I use to clean and disinfect the meter?

70% isopropyl alcohol Mild dishwashing liquid mixed with water 10% household bleach solution (1 part bleach plus 9 parts water) made the same day

What is the difference between cleaning and disinfecting?

Cleaning is simply removing dirt from the meter, while disinfecting refers to removal of most but not all, disease-causing and other types of microorganisms.

When should the meter and lancing device be cleaned and disinfected?

Clean and disinfect your meter once a week, or any time blood gets on the meter. You should also clean the meter before allowing anyone else to handle it.

Is the time and date or memory lost when the battery is removed?

The meter includes an additional internal battery that retains the time and date for up to 72 hours. So when the battery is changed, no memory is lost.

What type of battery is used?

The meter uses 1 3-volt lithium coin cell battery (type CR 2032) found in many stores.

How do I change the battery in my Accu-Chek Performa blood glucose meter?

Make sure you have a new 3-volt, lithium battery, number CR2032, to insert. Open the battery door on the back of the meter, remove the old battery for at least 20 seconds, and press any button on the meter. Insert the new battery with the “+” sign...

How long will the battery last in my meter?

Your battery should last for approximately 2,000 tests.

Do control test values stay in the meter memory?

Control test values will not be in the user-accessible memory. However, they will be stored in the downloadable memory.

Why does the control solution bottle need to be wiped?

In the same way that fresh blood should always be used for testing, fresh control solution should be used to prevent a contaminated control drop. Control solution should always be wiped from the tip of the bottle so that only what is in the bottle...

How do I run a control test?

The Accu-Chek Performa blood glucose meter automatically recognizes Accu-Chek Performa Control Solutions, so running a control test is easier than ever. First, wipe the tip of the control bottle. Then put the meter on a flat surface, insert the strip,...

When and why is it helpful to test with a control solution?

Performing a control test lets the user know the meter and test strips are working properly. Perform a control test when: ...

Can I use an expired test strip?

No, check the use by date on the test strip container. Do not use test strips past the use by date.

Can I use a test strip from another Accu-Chek system in the Accu-Chek Performa blood glucose meter?

No. Accu-Chek Performa blood glucose meters are designed exclusively for use with Accu-Chek Performa test strips.